Pontiac G6 16 Inch 5 Lug Black Steel Rim/16x7 5-110 Steel Wheel Hub Bore - 65.1mm

Discussion in 'Renegade Wheels & Tires' started by Dewatto, Mar 21, 2019.

  1. Dewatto

    Dewatto Member

    Joined:
    Mar 19, 2019
    Messages:
    87
    Location:
    Washington State
    Anyone try these on Front of the Trailhawk, any issues with brake calipers? (without spacers)

    Pontiac G6 16 Inch 5 Lug Black Steel Rim/16x7 5-110 Steel Wheel Hub Bore - 65.1mm

    Thanks!
     
  2. Dewatto

    Dewatto Member

    Joined:
    Mar 19, 2019
    Messages:
    87
    Location:
    Washington State
    Last edited: Mar 27, 2019
  3. Dewatto

    Dewatto Member

    Joined:
    Mar 19, 2019
    Messages:
    87
    Location:
    Washington State
    Well it seems some 16" wheels fit fine, specifically the Jeep Steel wheel used on other models:

    Q: Will the 16" steel wheel fit on the Trailhawk with its slightly larger front brakes?
    Asked - 4/24/2015
    A: Yes, this factory standard steel wheel or wheel set will fit the Trailhawk.

    The point at issue is the clearance of the brake calipers.

    On the factory standard setup Trailhawk with this 16" steel wheel installed there is 1/4" (6mm) clearance at the tightest point and the clearance widens quick to both sides of this location.

    On a Trailhawk with our Renegade Ready 1" wheel spacers installed. There is 5/16" clearance in only a very small area that widens considerably toward the inside of the vehicle. Photos of the wheel with and without the wheel spacer are shown for reference.
    Was this answer helpful? 3 of 3 Customer(s) found this Answer helpful.
    Answer provided - (4/24/2015)


    So I guess I need to order 1 wheel and check, like Wayalife did with the Chevy HHR.
     
    Last edited: Mar 27, 2019

Share This Page