Rotopax with camcan mount

Discussion in 'Renegade Modified Tech' started by njedgexj, Nov 3, 2018.

  1. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    mounted the camcan bracket with a rotopax holder. Kinda like it only on one side of the jeep IMG_1265.JPG
     
    Ryan Conger, Jeremiah and eracer426 like this.
  2. Mrsig

    Mrsig Active Member

    Joined:
    Sep 5, 2018
    Messages:
    335
    Location:
    Bushnell, FL
    That looks nice are you going to put one on the other side?
     
  3. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    I might leave the other side off I think it looks better on the right side only I can always add the left bracket at anytime if I feel like it
     
  4. Jeremiah

    Jeremiah Member

    Joined:
    Aug 13, 2018
    Messages:
    40
    Location:
    Rapid City SD
    That looks good I may have to "steal" your idea and do the same. I was going to mount them flat on my gear basket but was worried they might leak so this is a way better idea. What size can did you go with out of curiosity?
     
  5. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    I went with the 2 gallon ones. I am going to have to get a new set of hatch struts the factory ones will not hold up hatch with the can on even when can is empty
     
    Jeremiah likes this.
  6. Jeremiah

    Jeremiah Member

    Joined:
    Aug 13, 2018
    Messages:
    40
    Location:
    Rapid City SD
    Hopefully you can find some that will work.
     
  7. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    I should be able to get a stronger set from liftsupportsdepot.com I have used them in the past for other projects
     
  8. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    Just talked to liftsupportsdepot got a new set of stronger supports coming will test them out when I get them if they work I will post up the part numbers. I wonder if anyone else who has installed camcan mounts has had issues with the hatch not staying open
     
    Last edited: Nov 8, 2018
    Jeremiah and Ryan Conger like this.
  9. PewBU

    PewBU New Member

    Joined:
    Nov 9, 2018
    Messages:
    3
    Location:
    gunner12
    I had issues in my old renegade when I put the mount and cans on
     
  10. Wickedspirits4x4

    Wickedspirits4x4 New Member

    Joined:
    Jan 23, 2018
    Messages:
    3
    Location:
    Randleman NC
    What hitch are you running?
     
  11. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    I took the stock trail hawk bumper and welded in a 2" receiver. I use it for my basket when I go camping and my dirt bike carrier. I weld a lot of stuff at work and home so I was comfortable doing it. I don't plan on towing with it but I have tested it out in my yard with my 19' travel trailer tongue weight was definitely over the max for the renegade but my setup didn't move a millimeter.
     
  12. Wickedspirits4x4

    Wickedspirits4x4 New Member

    Joined:
    Jan 23, 2018
    Messages:
    3
    Location:
    Randleman NC
    Thanks, I was wondering because of the location it was at on the bumper.
     
  13. njedgexj

    njedgexj Member

    Joined:
    Oct 22, 2018
    Messages:
    34
    Location:
    Florida NY
    No problem I really didn't want to get an aftermarket hitch they hang super low, and I didn't want to spend 500.00 from renegade ready just to carry some camping gear
     

Share This Page