custom turbo back exhaust

Discussion in 'Renegade Modified Tech' started by manucrystal, Oct 31, 2017.

  1. manucrystal

    manucrystal Active Member

    Joined:
    Dec 14, 2016
    Messages:
    140
    Location:
    chicago
    So I really wanted an back exhaust added on for the sound and maybe even some performance.
    The price been way too high the one offered out there by (ragazon ) or such, I thought wasn't worth so much for my budget, and just cutting the muffler would ended up been too loud and bother some and also not look well without exhaust TIP. So i looked on Ebay and saw a large variety of pieces and parts that can be put together custom done by anyone and can be clamped together without been necessarily welded so i did it myself with no needing to go to shop up on jack stands in a few hours with a couple visits to my local Pep Boys for little added accessories.
    In the end I'm very happy with the results as far as sound is quite Nice on a low heavy tone just enjoying at least now more than my music lol!
    Performance believe it or not it's way better power delivered at 5000rpms:):)! and it feels like it's "breathing"out very nice overall with having all the other small mods, my car now feels like a little monster:)
    20171014_032210.jpg 20171014_032154.jpg 20171014_033214.jpg 20171014_032116.jpg 20171014_032055.jpg 20171014_032026.jpg 20171014_032017.jpg 20171014_031954.jpg 20171014_031938.jpg 20171014_031920.jpg
     
    Last edited: Oct 31, 2017
  2. manucrystal

    manucrystal Active Member

    Joined:
    Dec 14, 2016
    Messages:
    140
    Location:
    chicago
    20171014_031843.jpg 20171014_031822.jpg 20171014_031813.jpg 20171018_173956.jpg
     
    Last edited: Oct 31, 2017
    plish71 likes this.
  3. manucrystal

    manucrystal Active Member

    Joined:
    Dec 14, 2016
    Messages:
    140
    Location:
    chicago
    The parts cost me about 200$ and everything from the middle of the car it's on 2.5 inch
     
  4. burnttoast

    burnttoast Active Member

    Joined:
    Aug 5, 2016
    Messages:
    258
    Location:
    Mascoutah, IL
    Way to be creative! If you are happy with it, go spend $50 and all the seems welded otherwise tons of clamp points so expect exhaust leaks. Post vid
     
  5. manucrystal

    manucrystal Active Member

    Joined:
    Dec 14, 2016
    Messages:
    140
    Location:
    chicago
    Had actually small leaks in 3 or 4 locations and it was quite easy to seal it with this paste that turns into steel Screenshot_20171031-113359.png
    Drove it after that with no more issues for more then 120miles..
     
  6. manucrystal

    manucrystal Active Member

    Joined:
    Dec 14, 2016
    Messages:
    140
    Location:
    chicago
    I tried uploading clip but it just won't upload more than 5mb per load..sorry
     
  7. Newadventurer

    Newadventurer Member

    Joined:
    Sep 28, 2016
    Messages:
    91
    Media:
    2
    Albums:
    1
    Location:
    Richmond, Va
    Did you custom fabricated exhaust increase or decrease your ground clearance, or is it pretty much the same?
     
  8. manucrystal

    manucrystal Active Member

    Joined:
    Dec 14, 2016
    Messages:
    140
    Location:
    chicago
    Maybe 1/2 inch in some areas, and where the bolt threads stick out in couple areas but very insignificant
     

Share This Page