hey guys...does anyone know how to pop off the plastic black box behind the rear view mirror...I'm cleaning the windshield and tap the box and a small black rubber piece fell down it's like 1/4" round and and 1/2" long rubber I think it would be for the black box vibration ...it probably pushes against windshield and box to keep the box from vibrating I suppose.....anyone know how to pop off plastic box.....shouldn't have anything in it I have no nav or lane change or any thing I think that it would cover......where to find info to pop off or if someone knows thanks
Here's a write up on removing the sensor cover (Black box) behind mirror: https://toasterjeep.com/index.php?t...arview-mirror-out-of-the-way.1322/#post-10925
wow ...very informative fred........got it off replaced that little piece of rubber it just slide into the hole in bottom cover for vibration control for black bow....I would love to do that to my mirror but I have the green light on bottom ...what it is not sure.........I'll look into it......also fred since you really have some skills ...I have a noise when I make a left turn or get jarred 4 wheeling and get thrown to the right and the seatbelt locks up to hold me in my seating position the driverside seatbelt height adjuster make noise ...its loose/or has a lot of play in it...passenger side is a lot tighter don't hear noise ....popped the plastic cap off and can't seem to to find a way to remove to see whats going on...and the big torx screw is tight....so just wondering if it can be tightened to take some of the slop out...hate to go to dealer...they love to sell them but working on them not so much...thanks fred
