Rear Camera connection

Discussion in 'Renegade Modified Tech' started by Mr.F, Feb 4, 2018.

  1. Mr.F

    Mr.F New Member

    Joined:
    Nov 16, 2017
    Messages:
    17
    Location:
    California
    I’ve upgraded my 3.0 radio to a Modern double din. Part of this was to add a backup camera. I need to connect the “signal trigger” wire to my backup lights. I don’t know which wire to tap into.

    Can someone help me out?
     
  2. persquank

    persquank Active Member

    Joined:
    Jun 24, 2016
    Messages:
    227
    Media:
    23
    Albums:
    1
    Location:
    MKE
    If the head unit just needs a 12v signal to enable the video, you could tap into the reverse light by running a long cable all the way back to the tail light. Other wise, you would need a CAN bus adapter to get the appropriate signals.
     
  3. Mr.F

    Mr.F New Member

    Joined:
    Nov 16, 2017
    Messages:
    17
    Location:
    California
    The set up came with the Maestro idata module...


     

Share This Page