Regarding KO2's and Spacers

Discussion in 'Renegade Wheels & Tires' started by Ssj20, Apr 18, 2018.

  1. Ssj20

    Ssj20 New Member

    Joined:
    Apr 12, 2018
    Messages:
    4
    Location:
    Niagara falls
    Question, this weekend I'm having the AVID 2" Lift Kit installed, with 225/65/17 KO2's, along with 1.25" spacers on my Latitude 4WD. I'm curious if the front tires will rub at full lock...should I return the spacers now and get the 1"? Any insight would be greatly appreciated!!
     
  2. Custm16

    Custm16 Member

    Joined:
    Dec 28, 2016
    Messages:
    41
    Location:
    Wisconsin
    they should fit without any spacers. and without any lift.... 1.25 inch spacers may cause an issue.
    are you using factory wheels? or aftermarket? if aftermarket, what's the offset?
     
  3. Ssj20

    Ssj20 New Member

    Joined:
    Apr 12, 2018
    Messages:
    4
    Location:
    Niagara falls
    I know they'll fit without any modifications, just skeptical about front tires rubbing with 1.25" spacers. They're factory wheels which I believe are 40mm offset.
     
  4. Custm16

    Custm16 Member

    Joined:
    Dec 28, 2016
    Messages:
    41
    Location:
    Wisconsin
    the extra .25 inches , from my understanding, will push the wheels out too far making turning a little too extreme. I'm under the impression from measurements that it will in fact rub. But I haven't seen any evidence of it. no one I knowof had actually physically tried it.
     
  5. robinsonmac

    robinsonmac Member

    Joined:
    Dec 11, 2016
    Messages:
    99
    Location:
    fort Collins
    It will rub at full lock.
     

Share This Page