I am pretty sure that size won't fit. That tire has a diameter of over 30 inches. anything over 29 inches will probably require spacers and pinch-seam grinding. If you can keep it under 29 inches, you might not need to do the pinch seam.
they should fit if you did the pinch seam mod and added wheel spacers. But speaking from personal experience, with only a 1.5" spacer lift, those tires will still rub when turning and it will be on the front of the front wheel wells, not the back where the pinch seam is. After I added a separate Eibach spring lift all the rubbing finally stopped.
