Can I reprogram my car for LED turn signals?

I put LED turn signals on my Jeep. Now my jeep thinks that the lights are burned out (which I was expecting). I ordered some 6ohm resistors so the car will think that there is a light plugged in. I would preffer not to use the load resistors because that would sort of defeat the purpose of having LED lights (using less electricity).

Is there any way I can reprogram my Jeep so that it does not flash quickly and stops showing the "burned out turn signal" warning?

 

I've only had my Renegade for a month now, but everything that I've read says to make sure that you buy CAN Bus bulbs. I put those in my running lights and have not had any problems. Apparently they know how to communicate with the main brain. Not really an answer to your question, but an alternate solution possibly.

 

did you just change the lamps or you bought that LED DRL/turn signal from ebay?

 

I just changed out the bulbs. As I mentioned, make sure that they are Can Bus. I bought them from superbrightleds.com. Part number 1157-W26-CBT. There is a picture on this thread https://toasterjeep.com/index.php?threads/new-renegade-owner.2287/#post-19113

 

yup,but i had already replaced the bulbs with Novsight,It uses ok